TV CLASSIC PLUS – BRIDGE – UNIVERSAL MOUNT
This bigger, badder, older sibling to the TV Classic is a bridge position only pickup that packs a mighty punch. Using thinner gauge wire, it saturates quicker with punchy mids but keeps that classic FilterTron vibe.
TONE/CHARACTERISTICS
Like a TV Classic but with more attitude, the TV Classic Plus is wound with thinner gauge wire providing slightly rounder top-end and touch of more output. Many players wish for a FilterTron that has more to its sound…this pickup fills that need very well. Installing the TV Classic Plus with a SuperTron paves the way for some serious Chet Atkins glory (check out his 59 Country Gentleman) but is also a wonderful combination that brings out some of the best sounds in the line (and secretly one of TVs favorite combinations).
INSTALLATION:
The Universal Mount is a direct drop-in replacement for standard sized Filter’trons – with and without “ears” or clips. This pickup comes with two pieces of compression rubber, 2 mounting (wood) screws, and the Universal Mount Clip Pack which includes everything you will need to mount the pickups to your ring or pickguard.
TECH SPECS:
OUTPUT/POWER
DC Resistance is not entirely an indicator of true pickup output, although it can be helpful.
Bridge (only): DCR – 7.8k / Inductance – 2.83H
WIRING NOTES
This pickup is shipped with 4-conductor wire but is ready for standard 2-conductor connection. The extra red and green wires come soldered together and taped off – to split coils, send these to ground.
Splitting coils works well with the TV Classic Plus due to higher coil strength. Additionally, the 4-Conductor wire is convenient for custom switching i.e. pickups combined in series or parallel.
HELPFUL NOTES:
Filter’tron Replacement: The Universal Mount is a direct drop in replacement for Vintage Filter’trons, HS Filter’trons, Fideli’trons, Mega’trons, Fulltrons and any other standard sized ‘Trons (including old No Ears & English Mount). Blacktop Filter’trons require one Dual Screw Mount Adapter per pickup in order to attach to their stock rings. When replacing Broad’trons and Gretsch-Buckers, you will need a new EM2 Ring.
Post-2012 Electromatics: One Dual Screw Mount Adapter per pickup will be necessary to mount Universal Mount pickups to your stock ring.
Streamliners: These guitars are made with “Gibson-style” rings instead of standard Gretsch rings. You will want to choose either an EM1 or EM2 Ring to replace these when installing a Universal Mount Pickup (this depends on which style you prefer). If you choose the EM2 Gretsch Style Ring you will also want a pack of Ring Risers.
Gretsch 5120/5122: New Rings and Ring Risers are necessary for this guitar due to it’s high neck angle.
Pre-2012 Pro Jets: These will require some specific modification in order to install Universal Mount pickups.
Humbucker Replacement: To replace standard Humbuckers, pair this Universal Mount with one of either the EM1 (Gibson-style), EM2 (Gretsch), or EM4 (Fender-style) rings.
Reviews
There are no reviews yet.