The FireBall dynamic instrument microphone is designed for harmonicas (both diatonic and chromatic) and beatbox. Clear, accurate, and capable of handling SPLs in excess of 140 dB without distortion, the FireBall is ideally suited for both live stage and studio recording applications.
The FireBall microphone has a smooth, uniform frequency response of 50 Hz 16 kHz, and a Cardioid pickup pattern for isolation and feedback control. It is lightweight, compact, and comfortable to hold. The FireBall is manufactured with a precision machined aluminum body, steel mesh grille, and a unique three-stage marbled anodized finish.
Because the FireBall Cardioid instrument microphone is a low impedance microphone, when using with a guitar amplifier, a quality, low-high impedance transformer (see T50k) is required.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
1x FireBall Instrument Microphone
1x DCLIP Microphone Clip
1x P1 Carrying Pouch
Specifications:
Transducer Type Dynamic
Frequency Response 50 Hz 16 kHz
Polar Pattern Cardioid
Output Impedance 280 ohms
Sensitivity 1.5 mV / Pa @ 1k
Capsule Technology VLM Tyle B
Off-Axis Rejection >23 dB
Maximum SPL 140 dB
Power Requirements None
Connector 3-pin XLRm
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish Machined Aluminum / Anodized
Weight 128 g
Length 77.5 mm
Reviews
There are no reviews yet.