Empress Effects Bass ParaEq EQ Pedal

Empress Effects Bass ParaEq EQ Pedal

The Empress Bass ParaEq is a studio-quality EQ and boost pedal made for bass. With sweepable Q, a dynamic low shelf, a 10M Hi-Z input for piezos and uprights, a balanced output, and more, it keeps your tone full and definedon stage, in the studio, or straight to DI.

The Empress Bass ParaEq is the only parametric EQ pedal on the market built from the ground up for bass. It gives players studio-grade tone shaping in a compact pedal format that is purpose-built for low-end instruments, not just adapted from guitar gear.

Following the success of our Bass Compressorand after hearing from countless players who were already using the ParaEq MKII Deluxe on basswe knew it was time to give bassists more than a good enough EQ. The Bass ParaEq delivers the same transparent, tone-sweetening power that made the Deluxe a favourite, but with frequency ranges, filters, and features tailored specifically for bass.

With a dynamic low shelf, bass-tuned EQ bands, a Hi-Z input for upright players, and an auto-detecting balanced output, its built to give bassists the control theyve always deservedon stage, in the studio, everywhere.

Features

• EQ/boost pedal with linked or independent switching
• 27V internal operation for high clean headroom
• 3 parametric bands with 15dB of boost/cut
• Variable bass-tuned bandwidth per band
• High-pass, low shelf, high shelf, and low-pass filters
• Footswitchable boost with up to 30dB of gain
• Auto-detecting balanced output for long cable runs
• Selectable Hi-Z 10M input for piezo pickups

Parametric Rules
The parametric EQ bands on the Bass ParaEq are engineered to overlap in key bass frequency ranges, giving you precise control over your tone. With the Bass ParaEq, you can boost 200Hz for thickness while cutting 300Hz to reduce muddiness. Each EQ bands variable Q filter lets you shape your sound as broadly or surgically as needed.

Used to graphic EQs? Or just not sure what to cut or boost? Check out our guide to visualizing frequencies and start mastering your EQ game.

Sound Great in Any Room
Every room sounds differentsome boost certain frequencies, others cause feedback. The Bass ParaEqs high- and low-pass filters are a great starting point to remove unwanted energy and prevent problem frequencies from ringing out. Once youve removed whats not essential, use a narrow Q on one of the parametric bands to target and tame specific resonances.

And if you need to shape the low end without muddying up your tone, the dynamic low shelf has your back. As you increase boost or cut, the shelfs break frequency adjustsgiving you broad, musical control when you need it and tighter sculpting when you dont. Its like having multiple low shelves in one knob.

Get the Most From Your Signal
The Bass ParaEq works with every kind of bass, including uprights. The piezo pickups in upright basses have a very high impedance, which traditional guitar pedals arent designed to handleleading to low-end loss and a dull, thin tone. Thats why the Bass ParaEq includes a selectable 10M high-impedance input, preserving the full fidelity of your instrument.

Need to send your signal over long cable runs? The Bass ParaEq will automatically detect when a balanced cable is plugged into the output and adapt the signal accordinglyso you dont lose tone or suffer interference.

Specifications

Input Impedance: 1M or 10M

Output Impedance: 100

Bypass Mode: Buffered Bypass

Frequency Response: 14Hz – 22kHz

Total Harmonic Distortion: < 0.1%

Noise: < -107dBu

Headroom: +30dBu

Input Voltage: 9VDC (Negative tip)

Required Current: 300mA

Power Input Connector: 2.1mm barrel connector

Height: 2.5

Length: 4.8

Width: 2.6

Weight: 1 lb