Shure Microflex Advance 4-Channel Dante Mic/Line Audio Network Interface Unit – Block Inputs

Bring More Clarity to the Conference – The Shure Microflex Advance 4-Channel Dante Mic/Line Audio Network Interface Unit – Block Inputs

High-quality sound can bring more clarity to the conference, but not without high quality conversion. ANI interfaces with Dante make it easy to connect analog microphones to the network. Paired with analog microphones, ANI keeps the conversation on track.

• Single Ethernet port carries Dante audio, power (PoE class 0)
• LEDs indicate device status and audio signal
• Control strings for third-party preset controllers including Crestron and AMX
• 4 Band C/S PEQ on every channel
• Provides channel summing to combine input signals and send them over a single Dante channel
• Browser-based software control for all device parameters, per input channel:
  • Preamp gain
  • Mute control
  • Digital gain
  • Polarity control
  • Phantom power
• 1/3 Rack unit wide
• Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
• Available in block connector (audio + logic) and standard XLR variations

SPECIFICATIONS

• ANI4IN-XLR: (4) XLR connector
• ANI4IN-BLOCK: (4) 6-pin block connector
• Phantom Power: selectable per channel, +48 V
• Logic Connections (Block connectors only): Sent as Ethernet command strings, LED(+5 V), Switch
• Polarity: Non-inverting, any input to any output
• Output: (1) RJ45
• Power Requirements: Power over Ethernet (PoE), Class 0
• Power Consumption: 10W, maximum
• Weight: 672 g (1.5 lbs)
• Dimensions (H x W x D): 4 x 14 x 12.8 cm (1.6 x 5.5 x 5.0 in.)
• Control Application: HTML5 Browser-based
• Operating Temperature Range: 6.7C (20F) to 40C (104F)
• Storage Temperature Range: 29C (-20F) to 74C (165F)
• Audio Frequency Response: 20 to 20,000 Hz
• Dante Digital Output:
  • Channel Count: 4
  • Sampling Rate: 48 kHz
  • Bit Depth: 24
  • Latency (does not include Dante latency): 0.35 ms
• Analog Gain Range: Adjustable in 3 dB steps, 51 dB
• Dynamic Range (Analog-to-Dante): 20 Hz to 20 kHz, A-weighted, typical, 113 dB
• Equivalent Input Noise: 20 Hz to 20 kHz, A-weighted, input terminated with 150
  • Analog Gain Setting= +0 dB: -93 dBV
  • Analog Gain Setting= +27 dB: -119 dBV
  • Analog Gain Setting= +51 dB: -130 dBV
• Total Harmonic Distortion: @ 1 kHz, 0 dBV Input, 0 dB analog gain,Greater than 0.05%
• Common Mode Rejection Ratio: 150 balanced source @ 1 kHz, Less than 70 dB
• Impedance: 5 k
• Input Configuration: Active Balanced
• Input Clipping Level:
  • Analog Gain Setting= +0 dB: +20 dBV
  • Analog Gain Setting= +27 dB: -7 dBV
  • Analog Gain Setting= +51 dB: -31 dBV
• Built-in Digital Signal Processing:
  • Per Channel: Equalizer (4-band Parametric), Mute, Gain (140 dB range)
  • System: Audio Summing

Manufacturer:Shure
Model:ANI4IN-BLOCK
SKU:I404716-N-24-WHXD
UPC: 042406475440

We are Chuck Levin’s Washington Music Center

Since 1958, Chuck Levins Washington Music Center has been the trusted destination for musicians and audio professionals across Maryland, Virginia, and Washington, D.C. Family-owned and operated, our legendary music store delivers Everything in Musicfrom instruments and recording gear to pro audio, rentals, and repair services.

Our team of musicians and industry experts lives and breathes gear, helping you build the perfect setup for your next performance, studio session, or installation. As an authorized dealer for top brands, we also offer our award-winning CHUCKSCLUSIVE lineexclusive, limited-edition instruments and collaborations recognized with the NAMM Top 100 Dealer Innovation Award for redefining what a music retail experience can be.

Chuck Levins isnt just a storeits a community built by players, engineers, and creators who share a lifelong passion for sound. Stop by our legendary Wheaton, MD showroom or contact us anytime for expert advice, product questions, or the best possible deal on your next piece of gear.