Walrus Audio Fundamental Series Reverb

The Fundamental Reverb provides you with the core sounds of ambient effects. With 3 reverb algorithms, you can go from ambients hall to an analog spring emulation, as well as a bright plate emulation.

– Time: Control the amount of reverb decay time. Left is minimum and right is maximum.
– Feedback: Control the amount of wet reverberated signal that is fed back into the signal.
– Mix: Control the mix of the effect and the original clean signal. All the way to the left is fully clean, and all the way to the right is fully Reverb.
– Slide Switch ” The slide switch allows you to change between 3 distinct Reverb algorithms.
– Hall ” Emulates the large sounds of an acoustic hall.
– Spring ” Emulates spring reverb commonly found in tube amps.
– Plate ” Emulates a smooth analog plate reverb.
– Bypass Switch ” Turns the effect on and off.
– Bypass LED – Illuminated when the effect is engaged.
– Trails Modes ” Hold down the stomp switch when applying power to the pedal.
– Input Jack – 1/4 inch cable from the instrument.
– Output Jack – 1/4 inch cable to amplifier.
– 9v Jack ” 9-volt DC, Center Negative, 100mA min.